Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Fontana, CA | Sycamore Contractors
We provide independent Jerith fence installation and repair across Fontana, from older west-side tract lots to newer east-side subdivisions, and the work here is shaped by one thing most cities don’t deal with: expansive clay soil that heaves posts out of plumb seasonally. Our crews spec the right Jerith series for the lot, set footings deep enough for the clay, and use aluminum-compatible hardware that won’t rust-bleed onto the finish. Call (877) 265-6284 for a free estimate on any Jerith fence or gate in Fontana.
Why Fontana Residents Choose Us for Jerith Service
Jerith aluminum fencing isn’t something we touch occasionally. Our crews install and repair Jerith ornamental picket, Regis rail, and decorative gate lines every week, so we know exactly how the 3-rail and 4-rail residential systems behave after a few Inland Empire summers. Nate Calloway runs Sycamore Contractors, and he’s the type to tell you straight: a Jerith fence is only as good as the footing it sits in and the hardware holding it together. We’re an independent contractor, not a Jerith dealer or authorized service center, which means we aren’t funneled toward any particular product line. We spec the right Jerith series for your Fontana lot, offer Rialto Jerith service, and back the installation with our own workmanship. That independence matters when a west-side post line has shifted in the clay and the easy fix won’t hold.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Fontana
Fontana’s specific combination of heat, wind, and soil creates a predictable set of failures on Jerith systems. Here’s what we see most often:
- Wind-driven gate sag and hinge pull-out after Santa Ana events. When posts are set in shallow or unamended footing concrete, sustained gusts work the hinge screws loose. The gate drops, the latch misses, and eventually the hinges tear out of the post face.
- Sun-bleached and chalked powder-coat finish on west-facing panels. Fontana’s UV exposure is unrelenting. We see finish oxidation and peeling at cut ends and welds on panels that face the afternoon sun, especially on homes with no shade coverage.
- Galvanic corrosion and rust bleed where steel hardware meets aluminum rails. Older Fontana installations often used whatever fasteners were on hand. Steel against aluminum in a dry, dusty climate still corrodes, and the rust bleed stains the white or bronze finish.
- Expansive-clay soil movement shifting fence-line posts out of plumb. This is the big one west of Sierra Avenue. Posts heave in winter moisture and settle in summer drought, pulling picket-to-rail gaps open and knocking gate latch alignment out.
- Gate latch misalignment from seasonal post movement. Even a quarter-inch of post drift makes the latch bind or miss entirely. On older lots, it’s a twice-a-year problem unless the footings are redone properly.
Jerith Service in Fontana: What Local Conditions Mean for Your Equipment
Much of the post-war housing west of Sierra Avenue in ZIP codes 92334 and 92335 was built on expansive clay that has never been bolted or braced, and the soil out there heaves and settles with every wet winter and dry summer. That’s not a condition the newer east-side subdivisions in 92336 and 92337 share to anywhere near the same degree. For Jerith fence owners in Fontana and those needing Glen Avon Jerith service, it means posts set to a standard 24-inch depth will drift out of plumb within a few seasons. We set Jerith posts deeper on west-side lots, often with wider footing bells, and we re-check gate posts at every service call. It’s the difference between a fence that stays straight through ten summers and one that needs re-alignment every spring.
On a 1960s tract lot off the older west-side streets in 92335, our crew replaced a sagging Jerith aluminum picket run whose gate hinges had pulled loose from clay-heaved posts. We reset the posts with deeper footings, reused the sound OEM pickets and rails, and installed new aluminum-compatible stainless hinge hardware. The gate swings true through the Santa Ana season now. That’s the kind of repair you don’t get from a crew that doesn’t know Fontana soil.
Jerith Models & Products We Service in Fontana
We work on Jerith’s aluminum ornamental picket fencing in both residential 3-rail and 4-rail configurations, the Regis aluminum rail line, decorative and ornamental aluminum gate systems, and commercial-grade aluminum picket fence sections. For parts, we use Jerith OEM rails, pickets, and hinge and latch hardware so sections and finishes match. When fasteners need replacing, we use aluminum-compatible stainless, never zinc-coated steel. That’s a small detail that prevents the rust bleed we see on older Fontana installations. Sagging gates and bent sections get repaired when the structure is sound; heavily corroded or out-of-plumb runs usually justify replacement because patching a shifting post line fails again, and nobody wants to pay for the same repair twice. For broader Jerith work in the region, see our Jerith sales & service page.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Fontana
Most Jerith fence work in Fontana falls into three categories, and the price depends on the run length, the soil conditions on your lot, and whether we’re replacing posts or the entire system. Here’s what we typically see:
| Service | Price Range |
|---|---|
| Aluminum Fence Installation | $4,000 – $10,000 |
| Vinyl Fence Installation | $3,500 – $9,000 |
| Paver Patio Installation | $3,500 – $11,000 |
A west-side lot with clay soil will run toward the higher end of the aluminum range because the footings need more depth and more concrete. A clean east-side subdivision install with straightforward access runs lower. Every free estimate includes a written line-item quote so you can see exactly where the money goes before you commit. Call (877) 265-6284 to schedule yours.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and also provide Jerith service in Bloomington, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Fontana
Yes, when the posts are set deep enough in the footing and the gate hinges are installed with stainless hardware into solid post material. A properly installed Jerith aluminum fence handles Santa Ana gusts fine; the failures we see are almost always traceable to shallow footings or steel fasteners that have corroded. Call (877) 265-6284 if your gate has started sagging after a wind event.
Yes. Jerith still manufactures the aluminum picket and rail profiles used in most older installations, and we source OEM sections to match the existing finish and dimensions. The main variable on older Fontana homes is what the original installer used for hardware, which we replace with aluminum-compatible stainless as needed, and we bring the same expertise to Pedley Jerith service.
We do. Newer subdivisions typically have better-compacted fill and fewer clay-heave issues than the west side, which makes for a more straightforward install. We still check soil conditions and set footings to match, but the post-drift problems we see in 92335 are rare out east. Our Fontana service area page covers both sides of the city.
Usually, if the post itself isn’t cracked or rotted at the base. We re-set the post with a deeper footing if the soil has shifted it, replace the hinge hardware with aluminum-compatible stainless, and re-hang the gate. The repair cost depends on whether we’re re-footing one post or realigning a whole section. Call (877) 265-6284 for a quote on your specific gate.
Less than most other fence types. The powder-coat finish holds up better than paint or stain, but west-facing panels will eventually chalk and oxidize under Fontana’s UV load. Rinsing the panels twice a year and keeping sprinklers from hitting the fence line helps. If you’re seeing peeling at the cut ends or welds, we can assess whether it’s cosmetic or structural.
Service Areas Near Fontana
Beyond Fontana itself, we handle Jerith fence and gate work in surrounding communities. We serve Jerith service in Garnet and Jerith service in Santa Ana, and we regularly work in Temecula, Murrieta, Murrieta Hot Springs, Wildomar, and Fallbrook. If you’re nearby and need Jerith work done, call and ask.
Book Your Jerith Service in Fontana Today
We keep our Jerith schedule open for Fontana work, and for wind-damaged gates and fence lines we can usually get a crew out quickly. Call (877) 265-6284 to schedule a free estimate. We’ll walk the fence line, check the soil, and give you a straight answer on repair versus replace.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Fontana and the Inland Empire.