Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Brea, CA | Sycamore Contractors
We install, repair, and rebuild Unilock paver systems across Brea, and we do it as an independent contractor, not a manufacturer affiliate. That independence matters because it means our recommendations are driven by what actually holds up on Brea’s clay soils and sloped lots, not by what a single product line dictates. If you’re planning a Unilock driveway, patio, or retaining wall in Brea, you’re on the right page. Call (877) 265-6284 for a free estimate.
Why Brea Residents Choose Us for Unilock Service
Our crew has worked with Unilock products across Brea’s mid-century tract homes and hillside additions long enough to know which profiles fail here and which ones hold. That matters in a city where most construction is renovation, not new development. Brea is a built-out Orange County suburb, and the work we do here is different from what you’d see on a fresh tract in the Inland Empire. Nate Calloway, our owner, came up through Palomar College’s construction technology program and spent years running crews before starting Sycamore. He’s the first to say a paver driveway is only as good as the base under it. For Unilock Unilock sales & service, we bring brand knowledge and local soil knowledge to every job.
Styles & brands we work with







Common Unilock Construction Problems We Solve in Brea
- Efflorescence on Brussels Block and Beacon Hill pavers after winter rains. Brea gets most of its moisture between December and March, and north-facing patios where shade lingers are especially prone to that chalky white bloom. We clean and reseal the affected area, and we adjust the base drainage so it doesn’t come back next season.
- Edge restraint failure and paver migration on driveways over expansive clay. This is the big one in Brea. If the original base wasn’t compacted properly or lacks a geotextile separator, the clay swells in wet months and the pavers start drifting at the edges. We lift, re-set, and secure the field with Unilock’s genuine edge restraints.
- Joint sand erosion and weed intrusion on older patios. Brea’s summer heat bakes out the polymeric sand after enough years, and the joints open up enough for weeds to take root. We re-sweep with fresh Unilock joint sand and re-activate the bind.
- Retaining wall settlement or bulging on hillside properties near the 57 freeway. North Brea’s slopes move more than people expect, especially after a wet winter. Walls built without adequate drainage behind them start to lean. We rebuild with proper gravel backfill and tile outlets.
- Localized paver settling on patios and walkways. When a section sinks but the rest of the field is true, we don’t tear everything out. We lift the affected pavers, re-grade the base, and re-set them so the repair is invisible.
Unilock Service in Brea: What Local Conditions Mean for Your Equipment
Brea’s built-out status is the one thing that changes how every Unilock project is designed here. There is no open land left in the city. Every paver installation we do in Brea is a renovation on a lot that already has an established grade, an existing house, and a drainage pattern that has been working or failing for decades. That means we routinely tie new patio and driveway bases into the home’s existing yard drains and downspouts, rather than designing a standalone system as we would on new construction. It’s a detail a contractor offering Unilock service in Placentia or working on a fresh lot in Chino Hills or Corona would rarely consider. In the Brea-Olinda area, for instance, the 1960s tract homes sit on compacted clay and their downspouts often discharge right where you’d want a new patio. Get that wrong and your new Unilock surface becomes a pond.
Unilock Models & Products We Service in Brea
We install and repair the full range of Unilock hardscape products, but the profiles we see most often in Brea are Brussels Block, Beacon Hill, Estate Wall, and Town Hall. Brussels Block is the workhorse driveway and patio paver in this city, especially on mid-century homes. Beacon Hill is popular for walkways and pool decks. Estate Wall blocks show up as short retaining walls throughout the 1980s and 1990s planned developments in the 92821 and 92823 ZIP codes. We use Unilock’s genuine OEM edge restraints, joint sand, and wall connectors on every repair. If a paver field has localized settling, we lift and re-set the affected pavers rather than replacing the whole thing. If the base has failed across a wide area, we’ll tell you a full rebuild is the honest fix.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Brea
Here are the line-item ranges for the Unilock work we do most often in Brea. Prices reflect typical project scopes in this city’s housing stock and lot conditions.
| Service | Typical Price Range in Brea |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Home Addition | $45,000 – $130,000 |
What drives the cost on a Brea Unilock job: the condition of the existing base, the amount of excavation required, the paver profile you choose, and whether we’re tying into existing drainage or building new. Every estimate we give is a written line-item quote, not a round number. Call (877) 265-6284 and we’ll come out, walk the site, and give you exact numbers.
Serving Brea, CA — Our Local Coverage Area
We’re based in the Brea area and also provide Unilock service in Fullerton, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Brea
Yes, in most cases you will. Brea’s building department requires permits for paver driveways and for patios that alter site drainage or exceed certain square footage. We pull the permits ourselves and handle the inspections. Call (877) 265-6284 and we’ll tell you exactly what your project needs before we start.
Brea sits on expansive clay that swells when wet and shrinks when dry. If the base under your pavers isn’t thick enough and doesn’t include a geotextile separator, the pavers will shift with the seasons. We overbuild the base on every Brea job, and unlike some Unilock in Yorba Linda contractors who may deal with different soils, we always account for the clay’s movement cycle.
Sometimes, but not often. Brea’s older concrete driveways tend to be cracked and settled from the clay movement, which means an overlay would telegraph those same cracks into the pavers. We evaluate every slab on a case-by-case basis. If the concrete is sound, an overlay can work. If it’s failing, we recommend removing it and starting fresh with a proper compacted base.
Brussels Block and Town Hall both suit the clean, understated look of Brea’s 1950s and 1960s tract homes. Brussels Block gives a tumbled, timeworn texture that feels right on a mid-century ranch. Town Hall reads more formal and works well for walkways and entry courts. We can bring samples to your home so you can see them against your actual exterior.
The hillside slopes in north Brea require careful grading and drainage design. We tie the patio’s drain system into the home’s existing downspouts and yard drains, and we build a slight slope into the paver field so water moves away from the house. A flat patio on a hill is a standing water problem waiting to happen. Call (877) 265-6284 and we’ll walk your slope with you before we ever quote a number.
Service Areas Near Brea
We serve Brea service area and the surrounding communities, including Fullerton, Placentia, La Habra, Yorba Linda, and Rowland Heights. We also take on Unilock work farther out. See our Unilock service in Lake Arrowhead and Unilock service in Crestline pages for mountain-area details.
Book Your Unilock Service in Brea Today
Whether you’re replacing a cracked concrete driveway with Brussels Block, rebuilding a failing retaining wall near the 57, or adding a paver patio to a 1960s tract home, we’ll give you a straight answer and a written line-item quote. Call (877) 265-6284 to schedule your free estimate in Brea.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Brea, Unilock in La Habra, and Orange County. Do it right the first time, or you’ll do it twice in the July heat.