Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Perris, CA | Sycamore Contractors
We install, repair, reface, and retrofit KraftMaid cabinetry throughout Perris, and most of what we’re called for isn’t a fresh install. It’s a thermofoil door that peeled, a run that drifted out of level on a moving slab, or a kitchen where the original tract-grade install was never shimmed right in the first place. That last one matters more in Perris than almost anywhere else. We’re an independent contractor, not a KraftMaid dealer, which means we answer to your kitchen, not a sales program. Call (877) 265-6284 for a free estimate.
Why Perris Residents Choose Us for KraftMaid Service
We know KraftMaid construction the way a mechanic knows a specific engine line. Wakefield maple doors, Portrait thermofoil slabs, Momentum semi-custom painted runs, Kenwood and Heirloom raised-panel oak boxes. We’ve installed, corrected, and refaced them in kitchens across Perris, from the older block homes near D Street to the stucco subdivisions pushing east toward the I-215, and we also handle KraftMaid repair in Good Hope. Our owner, Nate Calloway, grew up in Redhawk and spent two decades running cabinetry and remodel crews across Southwest Riverside County. He’ll tell you the same thing every good carpenter learns: a cabinet door only fits as well as the box behind it. In Perris, where slabs move and summers bake west-facing walls, that lesson costs homeowners real money when it gets ignored.
This is our full-service KraftMaid sales & service work, and as a general contractor we handle the entire scope around your cabinets: removal of the old boxes, wall and floor correction, countertop fabrication, backsplash, lighting, and finish work under one accountable crew. You don’t chase three subs to get one kitchen done.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Perris
- Thermofoil delamination on Portrait-style doors. The vinyl layer peels back at the edges, especially on cabinet runs that sit near west-facing windows and sliders. Perris summers routinely push past 100°F, and that heat bakes the adhesive on the thermofoil until it lets go. We see it on almost every older tract home we walk.
- Raised-panel and mitered door frames separating. The valley’s single-digit humidity, followed by winter Santa Ana wind events, pulls moisture out of solid wood frames faster than the joints can handle. Kenwood and Heirloom raised-panel doors crack and telegraph at the miter lines. Sometimes the fix is a door replacement; sometimes the whole run needs refacing.
- Particleboard boxes sagging under stone tops. In the post-2000s Perris subdivisions, original KraftMaid boxes were often set directly onto slab-on-grade floors over expansive clay. When that slab moves, the boxes rack and the MDF floors sag under the weight of quartz or granite. The top may be flat while the cabinet underneath isn’t. That’s a structural problem, not a cosmetic one.
- Drawer glides and soft-close hinges failing. High-traffic family kitchens in ZIPs 92571 and 92570 put brutal daily use on drawer hardware. Soft-close mechanisms wear out, doors rack out of square, and drawers start catching. We replace the failed hardware with genuine KraftMaid parts when the line is still supported, and quality aftermarket soft-close when it isn’t.
- Runs out of level from poor original installation. This is the quiet killer. A production builder’s framing crew installs boxes against a wall that isn’t flat, on a slab that isn’t level, and never shims. Five years later the homeowner notices doors that won’t close square. We re-level the run before anything else gets touched.
KraftMaid Service in Perris: What Local Conditions Mean for Your Equipment
Here’s the detail that matters and nobody writes about. A large share of KraftMaid cabinetry in Perris sits inside tract homes built after 2000 on slab-on-grade foundations over expansive clay. Next door, the lot may still be empty graded dirt from the old dairy land that used to run along this corridor. As that clay expands and contracts with the dry-wet-dry cycle, slabs move, and cabinet boxes that were never shimmed or leveled properly go out of square. We routinely re-level a run before a new door or a quartz countertop will fit flush. Out in the new phases near March Air Reserve Base and the I-215 growth corridor, where we also provide KraftMaid in Mead Valley, a homeowner moves into a finished house while the adjacent parcel is still being graded. Dust gets into everything, including hinge mechanisms. The result is a kitchen that needs dialing back into square and true, not just new doors. This is the Perris-specific combination that separates our KraftMaid work from what a generic shop would do: we correct the slab-movement problem first, then we make the cabinets right. Do it right the first time, or you’ll do it twice in the July heat.
KraftMaid Models & Products We Service in Perris
We work on the full KraftMaid construction catalog: Wakefield full-overlay maple doors, Portrait thermofoil slab doors, Kenwood and Heirloom raised-panel oak cabinets, and Momentum semi-custom painted or stained door styles. On the parts side, we source genuine KraftMaid replacement doors, drawer fronts, hinges, and glide hardware where the line is still supported. When OEM is discontinued, we match with quality aftermarket soft-close hardware and door fronts that read visually identical to the original run. For Perris turnaround, we stock common hinge and glide sets in our local vans so a repair call doesn’t turn into a two-week wait for a parcel from Ohio.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Perris
Cost depends on whether we’re correcting, refacing, or rebuilding. A reface with new doors and drawer fronts runs less than a full tear-out, but if the boxes are racked out of square on a moving slab, replacement is the honest recommendation. That’s not upselling. It’s arithmetic.
| Service | Typical Range in Perris |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Kitchen Remodel | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Backsplash Installation | $800 – $2,500 |
Every estimate is free and written line-by-line. Call (877) 265-6284 to schedule yours.
Serving Perris, CA — Our Local Coverage Area
We’re based in the Perris area and know this community well, and we also cover KraftMaid repair in Romoland. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Perris
If the boxes are square and level, we replace the failed thermofoil door fronts and drawer fronts individually. You don’t need new cabinets just because the vinyl layer delaminated. We match the style and finish as closely as the current KraftMaid line allows, or use a quality aftermarket front if the original line is discontinued. Call (877) 265-6284 and we’ll inspect the run before anyone sells you a full kitchen.
Almost always, yes. Slab-on-grade construction over expansive clay means the boxes have typically drifted since the original install. A new countertop set on a run that’s out of level will crack or telegraph the unevenness. We check every run with a laser and re-shim before any top goes down.
Significantly less in most Perris kitchens. Refacing runs roughly $4,000 to $13,000 depending on door style and hardware, while a full remodel starts around $14,000. If your boxes are sound and your layout works, refacing is the smarter spend. If the boxes are swollen or sagging, we’ll tell you straight and you can decide. Estimates are free at (877) 265-6284.
In most cases, yes. Wakefield, Portrait, Kenwood, Heirloom, and Momentum styles still have matching fronts available through the KraftMaid parts channel or our aftermarket suppliers. For discontinued finishes, we’ll show you physical samples before you commit to anything.
Interior cabinet and kitchen work doesn’t trigger HOA design review in most Perris subdivisions. The rules apply to exterior changes: façades, windows visible from the street, fences, patio structures. If your project does cross into exterior scope, we pull whatever approval your HOA requires and handle the paperwork. We work across Perris service area homes with active HOAs on a regular basis, so the process doesn’t slow us down.
Service Areas Near Perris
We cover all of Perris, plus KraftMaid service in Nuevo to the north, KraftMaid service in Valle Vista to the east, and the surrounding communities: Temecula, Murrieta, Murrieta Hot Springs, Wildomar, and Rainbow. If you’re in a Perris-adjacent subdivision, call and we’ll let you know our next available slot.
Book Your KraftMaid Service in Perris Today
Call (877) 265-6284 to schedule your free, written estimate. We’ll inspect the boxes, check the slab movement, and give you a straight answer on what needs to happen. No dealer script, no pressure, just a plan for your kitchen in Perris or KraftMaid repair in Sun City.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Perris and the Inland Empire.