Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Dvele Construction in Temecula, CA | Sycamore Contractors
We’re Sycamore Contractors, and we provide General Contractor in Temecula independent Dvele construction service across Temecula’s wine-country parcels, estate lots, and master-planned subdivisions. What makes our Dvele work here different is that we understand the split between HOA-reviewed neighborhoods and unincorporated acreage – and how Temecula’s dry heat and Santa Ana winds punish factory-built module seams faster than anywhere coastal. If your Dvele home needs roof detailing, seam re-sealing, or a full addition, call (877) 265-6284 for a free estimate.
Why Temecula Residents Choose Us for Dvele Service
Dvele builds factory-module homes with high-performance envelopes and net-zero-ready mechanical systems. The factory side is precise. The site side – that’s where Temecula’s climate starts working against the product. We’ve spent years on the stucco-to-module transitions, roof flashings, and utility tie-ins that Dvele’s factory scope doesn’t cover, and we’ve learned exactly where these assemblies fail in inland Riverside County.
Nate Calloway, our owner, grew up in the Redhawk neighborhood of Temecula and trained in construction technology at Palomar College before running crews across Southwest Riverside County for the better part of two decades. He knows what a Dvele roof assembly looks like after five summers of triple-digit heat and three rounds of Santa Ana winds. We carry OEM module connection hardware for critical structural and weather-tightness interfaces, and we keep quality aftermarket flashing and sealants on the trucks for the detailing work where spec-meeting substitutes save you money without cutting corners. Call us at (877) 265-6284.
Styles & brands we work with
Common Dvele Construction Problems We Solve in Temecula
- Module seam and foundation joint sealing failures. Factory-built wall and floor modules meet at joints sealed with caulking and gaskets. Under Temecula’s triple-digit summers, those seals dry out, shrink, and crack. Santa Ana wind cycling then works the gaps wider, letting dust into the home and forcing the cooling system to work harder. We re-seal with OEM connection hardware and fresh sealant rated for the heat load.
- Stucco pulling away at module joints and penetrations. The dry inland climate here strips moisture from exterior caulking faster than coastal zones ever see. Hairline gaps open at the stucco-to-module interface, and rare but intense winter rain finds them. We cut out the failed material and re-caulk with sealants built for 110-degree thermal swings.
- Loose or damaged roof edge and ridge metal. Ridge-line lots in Redhawk and the wine-country estates catch the full force of Santa Ana winds. Factory roof assemblies meet site-installed flashing at those edges, and the fasteners loosen season after season. We re-secure the roofing detail before a fall wind event turns it into a leak.
- Utility and mechanical chase penetrations. Dvele modules come with chases for electrical, plumbing, and HVAC. When a Temecula homeowner adds an ADU, patio cover, or rooftop solar after the original set, those chases often get re-penetrated and need re-flashing and sealing at the module interface. We handle that as part of our full-scope work.
- Roof assembly water intrusion after storm events. Temecula’s dry season hides drainage and waterproofing failures until a winter storm drops two inches in a day. Factory roof assemblies with compromised edge metal or flashing fail exactly then. We inspect, diagnose, and repair before the next rain cycle exposes the same seam twice.
Dvele Service in Temecula: What Local Conditions Mean for Your Equipment
Here’s what most contractors miss about Dvele work in Temecula specifically. The city’s master-planned backbone means most subdivisions – Redhawk, Paseo del Sol, Harveston, Wolf Creek – are under HOA architectural review, and a Dvele roof replacement or exterior change often has to match the original builder-era profile. But Temecula’s wine-country and rural estate parcels sit in unincorporated-edge zones where Dvele modular homes are placed on acreage outside HOA review entirely. Those lots have to satisfy Riverside County’s fire-resistant and ember-resistant detailing requirements at the wildland edge – details the master-planned subdivisions don’t require. So on the same calendar, we might re-seal module joints on a Redhawk tract home under strict HOA color and tile-profile rules, then re-flash a Dvele in Rainbow wine-country Dvele home where the county’s fire marshal wants ember-resistant venting. Two wholly different compliance paths. If you’re on acreage off Rancho California Road or in the rural edge past Wolf Creek, your Dvele service scope looks nothing like a neighboring subdivision job. We quote both correctly.
Dvele Models & Products We Service in Temecula
We work on the full Dvele product range: modular single-family home modules with factory-built wall, floor, and roof assemblies; high-performance envelope packages built around advanced framing, continuous insulation, and air-sealing; prefab ADU modules; and net-zero-ready packages with rooftop solar and heat-pump systems. Our parts approach is straightforward: we source Dvele’s OEM module connection hardware and envelope components for anything on the load path or the weather-tightness interface. For flashing, sealants, and roofing accessories where an aftermarket product meets or exceeds the original spec, we use that instead. We don’t substitute on the load path, ever. That’s how we keep Temecula turnaround fast without compromising the assembly.
See the difference
Before
After
Before
After
Before
AfterDvele Service Pricing in Temecula
Dvele repair in Wildomar and Temecula varies by scope. A roof repair runs $400 – $1,800. Tile roof repair on a Dvele home typically lands between $600 and $2,500. A full roof replacement runs $8,000 – $20,000, while a metal roof installation spans $15,000 – $40,000. Home additions on Dvele properties – where we’re tying into factory-built walls and rooflines – range from $45,000 to $130,000 depending on size and compliance scope.
| Service | Price Range |
|---|---|
| Roof Repair | $400 – $1,800 |
| Tile Roof Repair | $600 – $2,500 |
| Roof Replacement | $8,000 – $20,000 |
| Metal Roof Installation | $15,000 – $40,000 |
| Home Addition | $45,000 – $130,000 |
Every free estimate includes a written line-item quote, and we walk you through which repairs are re-seal-and-re-detail jobs versus which assemblies need to be opened and rebuilt. Call (877) 265-6284 to schedule yours.
Serving Temecula, CA — Our Local Coverage Area
We’re based in the Temecula area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dvele Construction in Temecula
Yes – we’re an independent builder, not affiliated with or authorized by Dvele, so we’re free to inspect, repair, and add onto any Dvele home in Temecula without going through a factory service channel. That independence matters when a roof seam fails in Redhawk or a utility chase needs re-flashing in wine country. Call (877) 265-6284 for an honest assessment.
Coastal air holds moisture that keeps caulking and sealants pliable. Temecula’s inland desert climate runs triple digits through summer with single-digit humidity, which dries and shrinks caulking at module joints and stucco transitions. Santa Ana wind cycling then stresses those dried seams mechanically. It’s a two-part failure unique to inland Riverside County. We re-seal with products rated for both the heat load and the wind movement.
In master-planned communities like Redhawk, Paseo del Sol, Harveston, and Wolf Creek, yes – HOA architectural review often requires a replacement roof to match the original builder-era tile profile and stucco color. We’ve handled enough of these to know what clears review the first time. On unincorporated wine-country acreage, the HOA discussion disappears and Riverside County fire-resistance detailing takes over instead. Call (877) 265-6284 and we’ll tell you which path yours is on.
Yes, and this is where our full-scope capability earns its keep. We tie new framing, roofing, stucco, and utility chases into the existing Dvele module assembly, re-flashing and re-sealing every interface as part of the job. Home Remodeling – Temecula additions on Dvele properties run $45,000 – $130,000 depending on size and site conditions. A free estimate will pin down your number.
We source Dvele’s OEM module connection hardware and envelope components for anything on the structural load path or the weather-tightness interface. For flashing, sealants, and roofing accessories where a quality aftermarket product meets or exceeds the original spec, we use that. We never substitute on the load path. That’s the standard we hold, and it’s the standard the assembly was built to.
Service Areas Near Temecula
Our Dvele service coverage extends across Temecula proper and into the surrounding communities where factory-built modular homes sit on estate parcels and tract subdivisions alike. We serve Dvele service in Murrieta Hot Springs, Dvele service in Murrieta, plus Rainbow, Fallbrook, and Wildomar. Most of those zones carry the same dry-heat and Santa Ana wind profile – which means the same seam and flashing failures we fix in Temecula all week long. For the full picture on our local coverage, see our Temecula service area page, and for the broader brand scope, our Dvele sales & service overview.
Book Your Dvele Service in Temecula Today
If your Dvele home needs roof detailing, seam re-sealing, or an addition built to inland Riverside County standards, call (877) 265-6284. As Nate puts it, “Do it right the first time, or you’ll do it twice in the July heat.” Estimates are free.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Temecula since he first swung a hammer in Redhawk.