Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Fullerton, CA | Sycamore Contractors
We install and repair Jerith vinyl and aluminum fencing across Fullerton, and we’ve been doing it long enough to know what actually fails here. Root pressure from mature ficus and eucalyptus, expansive clay that shifts post footings, and Santa Ana wind loads all hit Jerith fences differently in this city than they do ten miles away. If you need Jerith work done right in Fullerton, call Sycamore Contractors at (877) 265-6284 for a free estimate.
Our team handles Jerith sales & service across every Fullerton ZIP code from 92831 through 92835, with deep familiarity in the older downtown and college-area neighborhoods where lot constraints make fence work genuinely harder. We’re independent Jerith specialists, not a manufacturer dealership, which means we can be straight with you about what to repair and what to replace.
Why Fullerton Residents Choose Us for Jerith Service
Nate Calloway grew up in Temecula, but the fence problems he sees in Fullerton are a different animal. Older lots, mature tree canopies, and soil that expands and contracts with the seasons mean a fence installed without local knowledge will lean, heave, or crack within a few seasons. We’ve spent years working on the pre-war bungalow and Spanish Colonial Revival stock in the central Fullerton neighborhoods, where the original fence lines were never built for the root systems that have grown up around them since.
We know Jerith’s product line backward, from the Traditional Vinyl series to the Regency and Imperial aluminum ornamental lines. We source OEM Jerith replacement panels, posts, and gates whenever the profile is still in production, and when a color or series is discontinued, we fabricate custom-matched caps and rails from quality aftermarket suppliers so the repair doesn’t look like a patch job. Our pickup-and-floats are stocked for the Fullerton flats, and we also carry inventory for Anaheim Jerith service calls, which means we’re not waiting on a distributor in Irvine when you need a mid-run post replaced.
One contractor, every phase. That’s how we work across Fullerton service area. Whether it’s a fence around a garage conversion or a full backyard line, we handle it under one accountable team, not three subs you have to chase.
Styles & brands we work with







Common Jerith Construction Problems We Solve in Fullerton
- Posts leaning or heaving from tree root pressure. Fullerton’s mature ficus and eucalyptus, especially around downtown and the college neighborhoods, send lateral roots into post holes within a few years. We see this most on older lots where the original Jerith line was set close to the property edge. We reset posts with deeper, bell-shaped footings and root-barrier consideration where it’s realistic.
- Vinyl panels fading, chalking, and cracking at the rail pockets. Fullerton’s hot, dry summers and Santa Ana wind exposure accelerate UV degradation on older Jerith vinyl. Panels that would last 15 years in a coastal city get brittle here in 8 to 10. We replace tongue-and-groove sections and re-set rail pockets before the failure turns into a blowout.
- Aluminum sections pulling loose from cracked concrete footings. Expansive clay in Fullerton’s older neighborhoods, particularly on pier-and-beam-era properties, shrinks and swells seasonally. That movement cracks shallow footings on Jerith aluminum ornamental fences, and the sections start to rattle or pull free at the posts. We re-set the footing and re-anchor the section, and we’ll tell you honestly if the whole post run needs to be redone.
- Gate sag and hinge failure on aluminum gates. The wind load across Fullerton’s flatter central corridors is real, and a Jerith aluminum gate with a shallow original footing will start to sag at the hinge within a few seasons, especially on drive-gate widths. We re-set the gate post, re-align the hinges, and install a stiffer post-to-gate connection that holds up to Santa Ana gusts.
- Fence lines around pre-1950s detached garages. This is the Fullerton-specific one. When a home in the older central neighborhoods has a detached garage behind the house, the set-back line and the tree roots both squeeze the fence path. We regularly hand-dig around structural roots and set footings that the city’s planning review will accept, which doesn’t happen on a standard tract-lot install.
Jerith Service in Fullerton: What Local Conditions Mean for Your Equipment
Here’s the detail nobody from a generic fence company will tell you. Fullerton’s pre-1950s detached garages, the ones sitting behind the Spanish Colonial and bungalow homes around downtown and near the college, are prime ADU conversion targets right now. The city has been issuing garage-conversion permits at a steady clip through 92831 and 92832, and nearly every one of those conversions triggers a fencing question, because the new ADU needs a privacy screen and the mature ficus or eucalyptus on the lot is already crowding the setback line.
A new Jerith fence line around a converted garage often has to be hand-dug around tree roots, and the city will review parking-permit conditions before signing off on the final. That means the fence has to be placed exactly where the plans say, with footings deep enough to survive the clay movement, and it has to be installed before the final inspection. A fencer who doesn’t know Fullerton will set posts too shallow, the gates will bind within two seasons, and the homeowner fails the final on a technicality. We plan for the roots, the setback, and the soil in the same pass.
We hit this exact scenario near the college neighborhoods in 92831. A homeowner wanted a 6-ft Jerith vinyl privacy fence to screen a detached garage they were converting to an ADU, but the proposed line ran within three feet of a mature ficus. We hand-dug every post hole to avoid cutting structural roots, set deeper bell-shaped footings with a concrete mix rated for expansive soil, and installed Jerith Traditional Vinyl panels with custom-matched caps to clear the city’s parking-permit setback review. The fence is now the privacy buffer between the new ADU and the neighbor, and the homeowner passed both the conversion inspection and the fence final without a callback. That’s the level of care Fullerton lots demand.
Jerith Models & Products We Service in Fullerton
We work on the full Jerith residential line: the Traditional Vinyl Fence, the 6-ft Vinyl Privacy Fence in tongue-and-groove, the vinyl picket profile, the Aluminum Ornamental Fence in Regency and Imperial series, and the matching aluminum gates. If the profile is still in production, we order OEM panels and posts direct from Jerith distributors. If it’s a discontinued color or an older series, we fabricate custom caps, rails, and pickets from quality aftermarket suppliers so the repair blends with the existing run.
For Fullerton turnaround, we keep the most common Jerith white and tan vinyl profiles, plus standard aluminum picket and rail stock, on hand. That means a mid-run post replacement or a panel swap doesn’t sit for two weeks while we wait on freight. We’ll repair over replace whenever the existing framework is sound, but if posts are heaving or panels are brittle, we’ll tell you straight: partial replacement usually costs more in callbacks than a clean re-set.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Fullerton
Fencing costs in Fullerton run a little higher than the county average because the site conditions add labor. Hand-digging around roots through the older neighborhoods, deeper footings for expansive clay, and the city’s setback reviews all add time, and time is the real cost driver.
| Service | Typical Fullerton Range |
|---|---|
| Vinyl Fence Installation (6 ft. privacy, per linear foot) | $3,500 – $9,000 |
| Aluminum Fence Installation (4 ft. ornamental, per linear foot) | $4,000 – $10,000 |
| Garage Conversion (shell and site work, excluding fence) | $30,000 – $80,000 |
The per-foot spread reflects what’s under the ground as much as what’s above it: root density, existing footing removal, and how deep the clay goes. A free estimate from us includes a site walk, a written line-item quote, and a straight answer on whether repair beats replacement. Call (877) 265-6284 to schedule yours.
Serving Fullerton, CA — Our Local Coverage Area
We’re based in the Fullerton area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Fullerton
Yes, if the post holes are hand-dug and the structural roots are left intact. We avoid cutting roots over two inches in diameter, which means shifting the post spacing slightly or setting posts between the major root flares. Fullerton’s older central lots have some of the densest ficus canopies in north Orange County, so we plan each hole before we dig. Call (877) 265-6284 and we’ll walk your lot and tell you exactly what the root picture looks like before you commit.
The clay in Fullerton’s central and northeast neighborhoods shrinks in the dry season and swells when the winter rain finally hits, which places lateral pressure on shallow footings and cracks them over time. We set Jerith aluminum posts in deeper, bell-shaped footings with a mix rated for expansive soil, and we don’t pour above the frost-line minimum. It’s the difference between a fence that holds for a decade and one that starts rattling in the third winter.
It can, especially on the older downtown and college-area lots where the pre-1950s detached garages sit tight to the setback line. Fullerton’s planning review checks that the new fence line doesn’t obstruct the required parking access or encroach on the neighbor’s line, which means the fence has to be installed exactly where the approved plans show it. We’ve handled enough of these conversions to set the fence line cleanly the first time. Call (877) 265-6284 and we’ll check your plans against the site before we quote.
The Traditional series has a simpler, narrower picket profile with flat-top rails, while the Regency and Imperial lines have a wider, more ornate picket with decorative finials and a heavier frame. For Fullerton’s Spanish Colonial Revival stock, especially around the downtown core and the 92832 corridor, the Regency’s ornamental profile reads more in keeping with the original ironwork details, while the Traditional suits the plainer bungalow facades. We’ll bring samples of both to your site walk and let you set them against the house before you choose.
We fabricate custom-matched caps, rails, and pickets from aftermarket suppliers who can bend and coat aluminum to the original color, or we can repaint the entire run if a panel match isn’t possible. Discontinued Jerith colors show up most on fences installed 15-plus years ago in the older Fullerton neighborhoods. We’ll tell you what a match will cost before we order anything, and the estimate is free. Call (877) 265-6284.
Service Areas Near Fullerton
We run Fullerton jobs from our base in Temecula, and the same crews cover Jerith service in Pomona and Jerith service in Brea on the same scheduling rotation. If you’re in Murrieta, Murrieta Hot Springs, Fallbrook, Wildomar, or Rainbow, we can work you into the Fullerton route calendar without a separate trip charge.
Book Your Jerith Service in Fullerton Today
Call (877) 265-6284 and we’ll get you a free, written estimate with a straight answer on what the Fullerton soil and root picture means for your fence. We keep a tight schedule on the Fullerton route, so we can usually get a site walk on the calendar within the week.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Fullerton since the company’s first fencing contract.