Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Construction in Ontario, CA | Sycamore Contractors
We install and service Jerith vinyl and aluminum fencing across Ontario, CA, and we do it with one eye on the Santa Ana wind season that runs through the Cajon Pass every fall. We’re an independent contractor, not a Jerith-authorized dealer, which means we’ll tell you straight when a repair beats a replacement and when the footing on your property line needs more concrete than the original builder ever poured. If you’re pricing Jerith fence work in Ontario, call (877) 265-6284 for a free estimate before the next wind event finds the weak post in your run.
Why Ontario Residents Choose Us for Jerith Service
Nate Calloway grew up in the Redhawk neighborhood of Temecula and spent two decades running crews across Southwest Riverside County before Sycamore Contractors became the full-scope operation it is now. That background matters when you’re standing in an Ontario backyard watching a Jerith Patriot privacy panel flex in a 50 mph gust. We know which series hold up in wind country and which need extra anchoring before they do. We carry genuine Jerith rails, posts, caps, and hardware for current-production series, and we match quality aftermarket components when a line’s been discontinued or the budget says that’s the honest call. One contractor, every phase: if your fence line meets a driveway apron that’s cracked or heaved, we handle that too, so you’re not coordinating a fence crew and a concrete crew on the same property line.
Styles & brands we work with
Common Jerith Construction Problems We Solve in Ontario
- Post lean and gate sag on wind-exposed runs. Ontario’s Santa Ana events slam through the Cajon Pass with enough force to find every shallow footing ever poured in expansive clay. The original footings on many Jerith aluminum and vinyl runs sit at flat-lot depth, so the post leans, the gate sags off its hinges, and the latch stops lining up. We pull the failing post, bell the bottom of the hole, and set it deeper with proper concrete.
- Vinyl panels popping out of the bottom rail near roof drainage. On the post-war ranch homes around Ontario’s older grids, downspouts and roof drip lines concentrate water into the same two or three panels every winter. Vinyl privacy panels crack at the base or work loose from the bottom rail where splash hits hardest. We replace the damaged panels and, where it makes sense, redirect the drainage so the fix lasts.
- UV chalking and color fade on south- and west-facing faces. Ontario’s dry Inland Empire summers bake Jerith vinyl panels for months at a stretch. The chalky, faded look shows up most where the fence run sits next to stucco that stays shaded, which makes the contrast obvious. We can replace faded sections with matching stock and advise on which Jerith series holds its color better under full sun exposure.
- Gate hardware wear and picket-spacing creep on older aluminum gates. Jerith aluminum ornamental gates take a beating from daily use, and after enough years the hinges wear, the pickets shift, and the gate no longer meets pool-code or HOA spacing specs. We re-hang gates so they swing true, and we check spacing against current code.
- Wind-season damage where the fence ties into an unbolted garage or patio cover. Many mid-century Ontario lots were platted before modern wind-loading and shear-wall expectations. A Jerith fence line on those blocks often terminates at a garage wall or patio cover that was never bolted for lateral loads. The fence takes the wind, and the connection point is the first thing to fail. We address the connection properly before it becomes a bigger problem.
Jerith Service in Ontario: What Local Conditions Mean for Your Equipment
Ontario was planned as an all-electric post-WWII model community, and its mid-century ranch blocks near the historic downtown grid were platted before modern wind-loading and shear-wall expectations existed. A Jerith fence line on those lots usually shares a grade with an original property line that ends at an unbolted garage or patio cover, so wind-rated post depth and a careful boundary check matter more there than on the 2000s stucco infill tracts a few blocks away. We’ve pulled failing posts off the downtown grid and found shallow footings in clay sitting right against the neighbor’s line, the exact condition that lets a Santa Ana gust fold a vinyl run. On a mid-century ranch lot in 91762, the original Jerith-style vinyl privacy run had three panels bowed out and two posts leaning after a wind season, and the gate wouldn’t latch. We pulled the failing posts, re-set them deeper with proper concrete, replaced the cracked panels with matching stock, and re-hung the gate so it swung true, all without disturbing the existing garage wall the fence ties into. That’s what Ontario’s wind-loading reality actually requires.
Jerith Models & Products We Service in Ontario
We work on the Jerith Patriot vinyl privacy fence, the Grandview vinyl ornamental and closed-picket line, the Chelsea aluminum ornamental series, and the Baron and Riviera aluminum pool-code fencing. That covers most of what’s standing in Ontario backyards today. Our parts approach is straight: genuine Jerith components when the series is still in production, and honest aftermarket matching when it’s not. We keep common rails, caps, and hardware in local stock for fast Ontario turnaround, and we’re tied into Jerith sales & service support that keeps our inventory aligned with what this region actually installs. Sycamore Contractors is an independent service provider. We are not authorized by, affiliated with, or endorsed by Jerith, and we’ll walk you through the repair-versus-replace math on the first visit.
See the difference
Before
After
Before
After
Before
AfterJerith Service Pricing in Ontario
We price Jerith work by the linear foot, the post condition, and what’s happening at the fence line. Here’s what Ontario homeowners typically see:
| Scope | Typical Range |
|---|---|
| Vinyl Fence Installation (Jerith) | $3,500 – $9,000 |
| Aluminum Fence Installation (Jerith) | $4,000 – $10,000 |
| Driveway Replacement (fence-line/site work tie-in) | $5,000 – $14,000 |
Post condition drives a lot: if your footings are sound, you’re looking at panel and hardware money. If they’re failing, you’re into footing replacement with deeper, wind-rated concrete, and that’s a different line item. Every estimate is free, written, and line-itemed so you see exactly what’s included. Call (877) 265-6284 and we’ll walk the fence line with you.
Serving Ontario, CA — Our Local Coverage Area
We’re based in the Ontario area and know this community well, and we also offer Jerith service in Montclair. Use the map below to see our full service coverage — if you’re nearby, we can almost certainly help.
FAQs – Jerith Construction in Ontario
No. Sycamore Contractors is an independent general contractor serving Ontario and the wider Inland Empire. We’re not authorized by, affiliated with, or endorsed by Jerith. What we are is experienced with their fence lines in this specific climate, and we install and repair them using genuine parts where available and honest aftermarket matches where that’s the better call. We also handle Jerith in Upland with the same approach.
Yes, that’s exactly the kind of multi-scope work we’re built for. When a Jerith fence post sits next to a driveway apron that’s cracked or heaved, the two are structurally connected whether anyone wants them to be. We repair or replace the apron and set the post properly at the same time, under one contract. That saves you from sequencing two crews and arguing about who damaged what.
Both, depending on the series and your budget. When the Jerith line is still in production, we use genuine rails, posts, caps, and hardware. When a series has been discontinued or the replacement cost doesn’t make financial sense, we match with quality aftermarket components and tell you exactly what we’re using and why. You’ll never find out from an invoice that we substituted something without asking. We follow the same transparency on every Jerith repair in Chino.
A typical repair with sound posts takes a day or less. Full replacement of a standard Ontario backyard run runs three to five days, depending on post count and what we find when we dig. Wind-season damage in Ontario sometimes means waiting for the wind event to pass before we can safely set posts and panels, but we schedule around the forecast and communicate any shift before it happens. The same holds true when we’re handling Jerith in San Antonio Heights. Call (877) 265-6284 for a more precise timeline on your specific run.
Most wind-damage repairs on Jerith vinyl or aluminum fencing run between $350 and $1,800, depending on how many posts failed, whether panels need replacement, and whether the gate needs re-hanging. If footings have to be re-poured to wind-rated depth in Ontario’s clay, the number moves up from there. Call (877) 265-6284 for an exact quote, and estimates are always free.
Service Areas Near Ontario
Our crews serve Ontario and the surrounding Inland Empire communities, including Rancho Cucamonga, Upland, Montclair, Chino, and Eastvale. We also regularly cross the county line for homeowners in Ontario service area coverage that extends south toward the Temecula Valley, where Nate’s roots still run through Jerith service in Indian Wells and down through Jerith service in Placentia for Orange County fence lines.
Book Your Jerith Service in Ontario Today
Wind season comes for Ontario every year, and the post that looks fine this week is the one leaning into the neighbor’s yard next month. Call (877) 265-6284, and we’ll walk your fence line, price the fix honestly, and tell you whether a repair beats a replacement. Do it right the first time, or you’ll do it twice in the July heat.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Ontario and the Inland Empire.