Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Temecula Homeowners Choose Mr-Glass Construction
Mr-Glass repair in Temecula for frameless shower enclosures has become one of the most requested services we provide, and Sycamore Contractors installs and services them as an independent provider. We repair the hardware failures, glass tolerance issues, and water-seal problems specific to Mr-Glass Serenity, Elite, Custom, and Pro Series doors, with OEM parts where it matters and honest repair-vs-replace guidance. We are not authorized by or affiliated with Mr-Glass, and we say that straight so you know exactly who you’re working with. If your Mr-Glass shower door is dragging, leaking, or sagging, call (877) 265-6284 and we’ll tell you what’s actually wrong before we quote anything.
Why Trust Sycamore Contractors for Your Mr-Glass Construction?
Our crew installs and repairs Mr-Glass enclosures across Temecula every week, from Paseo del Sol tract homes to larger wine-country estates, and we also handle Mr-Glass repair in Murrieta Hot Springs. That repetition means we know where these doors fail first: the bottom guide rail, the wall jamb seal, and the pivot hinges on frameless units. We’ve corrected installs from other contractors who used cheap aftermarket seals that shrunk within a year, or who skipped the backing behind hinge screws in fiberglass surrounds. Owner Nate Calloway grew up in Redhawk and has spent two decades running renovation crews across Southwest Riverside County. He’ll tell you the same thing about shower glass that he tells clients about every material: do it right the first time, or you’ll do it twice in the July heat. That standard applies to Mr-Glass hardware selection, glass handling, and the waterproofing we do behind every jamb.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Temecula
- Bottom guide rail corrosion and mineral buildup. Temecula’s hard water leaves scale on the lower track of Mr-Glass Elite Series sliding doors within two to three years. The rollers start dragging, the door seals gap, and water leaks onto the bathroom floor. We replace the OEM rail and swap the rollers before the glass panel develops stress chips.
- Pivot hinge loosening on Serenity Series frameless doors. We see this constantly in fiberglass surrounds where the original install lacked solid backing behind the hinge plate. The screws strip and the glass sags until it catches on the threshold. We add proper backing, replace the stainless hinges with Mr-Glass OEM hardware, and re-align the panel.
- Glass chipping at handle and hinge cutouts. When glass isn’t edge-polished to spec after cutouts, small chips form around the hardware and spread. On Custom Series neo-angle enclosures, the cutouts are tighter and less forgiving. We inspect the edges on every service call and flag any panel that’s no longer safely tempered.
- Leaking wall jambs leading to mold behind tile. A poorly sealed jamb on any Mr-Glass walk-in shower lets water wick into the wall cavity. In Temecula’s dry climate, the exterior of the wall may look fine while the back side is growing mold. We pull the jamb, dry-check the substrate, and re-seal with silicone rated for wet-area service.
- Roller bearing failure on Pro Series heavy-duty pivot doors. These doors are heavy by design, and when the top roller bearings bind, the whole panel torques the hinges out of square. We replace the bearing assembly and re-balance the door so the pivot doesn’t eat the hinge pins.
Mr-Glass Parts & Our Repair-vs-Replace Approach
We use Mr-Glass OEM hardware including hinges, handles, seals, and guide rails for warranty-sensitive and fit-critical repairs. When a Serenity door is still under manufacturer warranty, the last thing you want is a third-party hinge that doesn’t match the original drilling pattern. But for older out-of-warranty Mr-Glass doors, we source quality aftermarket seals and rollers that meet or exceed OEM specs at a lower price, and we tell you which path we’re taking and why. The repair-vs-replace call is simple: if the glass has chips beyond safe use or the aluminum frame is corroded through, you’re better off replacing the enclosure, especially a frameless unit where the glass is structural. We don’t patch unsafe glass. For a fast quote on either path, call (877) 265-6284.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. We measure the door alignment, test the rollers and hinges, and inspect the glass edges, seals, and wall jambs. We check the substrate behind the hinge plates on frameless Mr-Glass doors and look for moisture stains the homeowner may not have noticed.
- 2
Repair or install. We install OEM Mr-Glass parts for fit-critical and warranty-sensitive repairs, or exact-fit aftermarket options when the door is out of warranty. On new installations, we template the opening, order the glass to spec, and set the hardware with solid backing where the structure requires it.
- 3
Wet test. After every Mr-Glass service, we run water along the jambs, thresholds, and glass edges to confirm the enclosure is watertight before we call the job done. In Temecula, we also test with the doors open and closed to catch any seal compression issue.
- 4
Workmanship warranty. We stand behind every install and repair with independent workmanship coverage. We also document the parts we used so you have a record if a manufacturer warranty question comes up later.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Temecula
Our crew works with the full Mr-Glass product range: Serenity Series frameless shower doors, Elite Series sliding glass shower doors, Custom Series neo-angle enclosures, and Pro Series heavy-duty pivot doors. We stock common Mr-Glass OEM seals, roller assemblies, hinge sets, and guide rails locally so most repairs in the Temecula area and Murrieta Mr-Glass service calls don’t wait on a parts shipment. For new installations, we order glass panels cut to the manufacturer’s templated dimensions and handle the full build-out, from waterproofing behind the jamb to final hardware set.
We Also Service These Brands
Sycamore Contractors operates across every phase of the home, which means we’re not locked into one manufacturer’s catalog. We work with KraftMaid and other cabinet lines, Cambria and Silestone countertops, and Kohler plumbing fixtures. That breadth matters when a Mr-Glass shower enclosure is part of a larger bathroom remodel and you want one team accountable for the whole job.
FAQs – Mr-Glass Construction Service in Temecula
No. We are an independent Mr-Glass service provider, not an authorized dealer or warranty center. That means we can use OEM parts without markup games, and we give you straight repair-vs-replace advice because we don’t answer to a manufacturer’s sales quota.
Yes, we use Mr-Glass OEM hardware including hinges, handles, seals, and guide rails whenever a repair is warranty-sensitive or the part is fit-critical. For out-of-warranty doors, we may offer a quality aftermarket seal or roller that meets or exceeds OEM spec at a lower cost, and we’ll show you the difference before we install anything.
Most roller, seal, and hinge repairs take an hour or two on site. Full enclosure replacements typically run one to two days, including glass template, panel install, and wet testing. We schedule around your availability and the parts we already stock locally. Call (877) 265-6284 for a time estimate on your specific Mr-Glass issue.
We service and install the Serenity Series frameless doors, Elite Series sliding doors, Custom Series neo-angle enclosures, and Pro Series heavy-duty pivot doors. If you have a Mr-Glass model not listed, send us a photo of the door and hardware and we’ll tell you what we can do.
Using OEM Mr-Glass parts and following the manufacturer’s installation specifications is the safest way to protect your warranty. We document the parts and work on every service call. If your door is under warranty, we recommend checking with Mr-Glass directly before any third-party repair, and we’re happy to walk you through that process.
Pricing below reflects our current Temecula market rates for Mr-Glass work, including installation:
| Service | Price Range |
|---|---|
| Frameless Glass Shower Enclosure (including installation) | $4,500 – $12,000 |
| Tub-to-Shower Conversion (including glass enclosure) | $3,500 – $10,000 |
| Walk-In Shower Installation (including glass) | $4,500 – $12,000 |
| Shower Replacement (glass and fixtures) | $3,000 – $8,500 |
Your exact quote depends on the Mr-Glass series, the size of the opening, and the condition of the surrounding tile and waterproofing. Call (877) 265-6284 for a free estimate with line-item pricing.
It depends on the door series and where the damage is. On Serenity Series frameless doors, if a panel is chipped at a hinge or handle cutout, replacing the glass alone is usually safe if the hardware and seals are still sound. On Custom Series neo-angle enclosures, the glass panels are cut to tight angles, and replacing just one panel often costs close to a full unit once labor and templating are factored in. We’ll measure and price both paths so you can decide with real numbers. Call (877) 265-6284 for an exact quote.
Bottom leaks on Mr-Glass doors are almost always a worn bottom seal or a corroded guide rail that’s throwing the door out of alignment. In Temecula’s hard water, scale builds on the rail and the seal compresses unevenly. The fix is usually a new OEM seal and rail, which we stock locally. If the door has been dragging long enough to chip the glass edge, replacement may be the safer call. We diagnose it on site and show you the worn parts before we quote the repair.
Yes, we install Mr-Glass enclosures in Temecula every week, and hard water is the number one maintenance issue. We recommend a water softener if you don’t have one, plus a daily squeegee on the glass and a monthly wipe-down of the bottom rail and seal with white vinegar or a scale remover. On new installs, we can apply a glass coating that slows mineral adhesion. The coating helps, but it’s not a replacement for regular drying. Call (877) 265-6284 if you want us to apply the coating or check your existing seals.
Serenity Series doors are frameless, with thick tempered glass and minimal hardware for a clean sight line. Elite Series doors are sliding units, usually with a framed track and rollers, which makes them more forgiving of slightly out-of-plumb openings. Serenity doors show off custom tile work but are less tolerant of install mistakes. Elite doors are workhorses, but they need regular rail and roller maintenance in Temecula’s hard water. We’ll recommend the series that matches your opening, your maintenance tolerance, and your budget.
Yes. We convert tubs to walk-in showers and install Mr-Glass enclosures as part of that work. The typical Temecula tub-to-shower conversion with a Mr-Glass frameless or sliding door runs $3,500 to $10,000, depending on the size of the alcove, the tile or surround you choose, and the glass series. We handle the waterproofing, curb or zero-entry threshold, tile or solid-surface surround, and the glass all under one contract. Call (877) 265-6284 to schedule a free estimate.
Book Your Mr-Glass Service in Temecula, CA
We service and install Mr-Glass enclosures across Temecula, from Redhawk to Wine Country and everywhere between, plus Mr-Glass repair in Rainbow. If your shower door is dragging, leaking, or sagging, we’ll diagnose it straight and give you line-item pricing. Call (877) 265-6284 to schedule your free estimate. One call covers the diagnosis, the parts, the install, and the warranty behind our work.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Temecula and Southwest Riverside County.