Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
PGT Construction in Fontana, CA | Sycamore Contractors
We install, service, and repair PGT windows and sliding glass doors across Fontana, from the 1960s tract homes west of Sierra Avenue to the newer subdivisions in 92336 and 92337. We’re an independent contractor, not a PGT dealer or affiliate, so our read on whether a unit should be repaired or replaced is based on what we see in the opening, not a sales quota. What sets our PGT work apart here is that we account for Fontana’s expansive clay soils before we ever set a frame. Call us at (877) 265-6284 for a free estimate on any PGT project in Fontana.
Why Fontana Residents Choose Us for PGT Service
PGT’s aluminum and vinyl impact lines are built for coastal Florida conditions, but they behave differently when they live in Fontana’s inland heat and Santa Ana wind cycle. Our crew has installed and serviced PGT WinGuard windows and sliding glass doors across the Inland Empire for years, learning the product line on real tract homes and remodels rather than from a dealer training deck. We know which weatherstripping profiles shrink first on west-facing elevations, which rollers flatten under grit, and when a frame has moved enough that no hardware swap will make the sash close right. Nate Calloway grew up in Temecula’s Redhawk neighborhood and spent two decades running crews across Southwest Riverside County before building Sycamore Contractors with every trade under one roof. His take on PGT service in Bloomington and Fontana is simple: do it right the first time, or you’ll do it twice in the July heatat.
Styles & brands we work with
Common PGT Construction Problems We Solve in Fontana
- Dragging or stuck sliding glass doors. PGT vinyl impact door rollers flatten under the fine grit that Santa Ana winds drive into Fontana door tracks. Panels drop, the latch misses the strike plate, and the door starts binding at the bottom rail. We replace with factory-spec rollers where the profile is still available, or quality aftermarket units when it isn’t.
- Hazed or cloudy impact laminate. Older PGT WinGuard units on west and south elevations take years of inland heat cycling, and the interlayer between the glass panes can develop haze or edge seal failure. When the glass is compromised, we steer you to replacement rather than throwing money at a reglaze that won’t hold.
- Sill rot and frame staining on stucco-embedded windows. Fontana’s 1960s and ’70s west-side homes often have original PGT aluminum frames embedded in stucco with no continuous flashing. Wall and roof leaks show up as soft sills and rust staining, not obvious glass breakage. We pull the unit, reframe what’s rotted, and flash the new opening correctly.
- Windows that won’t close square after a few years. West of Sierra Avenue, the post-war tract housing sits on expansive clay that swells and shrinks with winter moisture, and much of it was never bolted or braced. Openings rack, frames twist, and sashes bind. Fixing the window means fixing the rough opening first.
- Failed weatherstripping and dust infiltration. Aluminum-frame PGT WinGuard units facing the afternoon sun in Fontana can cook their weatherstripping until it shrinks and cracks. Dust and grit slide into the track every dry season after that, and the sash starts to drag. We replace stripping with material spec’d for high-heat inland exposure.
These are the calls we field every week in Fontana, and each one gets diagnosed from the opening out rather than from a parts catalog backward.
PGT Service in Fontana: What Local Conditions Mean for Your Equipment
West of Sierra Avenue, a lot of Fontana’s post-war tract housing sits on expansive clay soils that were never bolted or braced, and that fact changes how PGT replacement work has to be done in 92335 and 92334. The soil expands when winter rains roll down from the Cajon Pass and contracts through the dry summer, and that cycle racks window and sliding-door openings over time. A PGT impact unit installed into a racked opening will never latch cleanly, no matter how good the hardware is. So for this part of Fontana, our work is as much about re-flashing and refastening the rough opening as it is about the window itself. We square the opening, add sill pan flashing, and only then do we set the new unit. In the newer master-planned subdivisions of 92336 and 92337, the soils are more predictable and the openings are fresher, so the work there comes down to product selection and clean installation rather than structural correction. Fontana is one of the few cities in the region where a window company has to be a retrofit contractor first and a window installer second.
On an older single-story tract home off Sierra Avenue in 92335, we pulled a pair of original PGT aluminum single-hungs whose sills had gone soft where stucco had bridged the flashing, and found the rough opening had racked slightly from the clay soils. We refastened and shimmed the opening square, replaced the rotted sill framing, added proper sill pan flashing, and set new PGT impact units so they shed water away from the wall instead of into it. The homeowners got units that close and latch cleanly through the Santa Ana seasons, not windows that just looked new.
PGT Models & Products We Service in Fontana
We work on the full PGT residential line that shows up in Fontana homes: PGT WinGuard Aluminum impact-resistant windows, PGT WinGuard Vinyl impact sliding glass doors, PGT Aluminum Series single-hung and fixed windows, and PGT Vinyl Series double-hung and casement windows. We source factory-spec rollers, weatherstripping, and glazing components where they match the original extrusion, and we use quality aftermarket hardware where the OEM profile has been discontinued or is on backorder. You’ll always know exactly what we put into your unit. This is the same parts discipline we apply across our broader PGT sales & service work throughout the Inland Empire. Stocking common Fontana-specific wear items locally means our turnaround on sliding door rollers, weatherstripping, and latch hardware is measured in days, not weeks.
See the difference
Before
After
Before
After
Before
AfterPGT Service Pricing in Fontana
PGT window and door work in Fontana falls into predictable bands based on scope and whether the opening needs structural correction. Here’s what we typically see:
| Service | Typical Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Tile Roof Repair | $600 – $2,500 |
| Roof Repair | $400 – $1,800 |
What moves the number on a Fontana PGT job is the condition of the rough opening. A clean swap into a square, well-flashed opening in 92336 costs far less than pulling a stucco-embedded aluminum frame in 92335, reframing a racked sill, and adding new flashing before the window ever goes in. Our estimates are free, written, and line-itemed, so you can see exactly where the money goes before you commit. Call (877) 265-6284 and Nate or one of our project leads will walk the job with you.
Serving Fontana, CA — Our Local Coverage Area
We’re based in the Fontana area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – PGT Construction in Fontana
Usually it’s a repair. The most common cause we see is a flattened or corroded roller at the bottom rail, which drops the panel and throws off the latch alignment. We pull the panel, replace the rollers with factory-spec or quality aftermarket equivalents, clean the track, and reset the strike plate. If the frame itself is bowed or the laminate is hazed, we’ll tell you to replace rather than pour money into a door that’ll fail again. Call (877) 265-6284 for an exact quote – estimates are free.
No. We are an independent contractor with no affiliation to PGT, and that’s deliberate. Warranty work on newer units should go through PGT’s authorized channel, but outside of warranty, there’s no requirement to be PGT-authorized for repair or replacement. Being independent means we’re not bound to OEM-only parts or replacement-first economics, so we recommend what the unit and the opening actually need. We’ll tell you exactly what we’re installing and why.
Because the soil under the post-war tract homes west of Sierra Avenue is expansive clay that swells and shrinks seasonally, and most of those homes were never bolted or braced. Openings rack over time, sills drop, and stucco embeds the frame without flashing. A new PGT unit won’t fix that; it’ll just inherit it. We square the rough opening, replace rotted framing, and add sill pan flashing before setting the new window. That’s the only way it’ll latch and seal through Fontana’s Santa Ana seasons.
Yes. PGT WinGuard Vinyl impact windows and sliding glass doors carry insulated laminated glass that handles impact and heat gain better than older aluminum single-pane units. For homes near the foothills where Cajon Pass winds drive wildfire ember exposure, we pair impact-rated units with proper flashing and ember-resistant detailing on the surrounding walls and eaves. We’ll spec glass packages for the specific elevation and heat load on your home rather than a one-size-fits-all package.
Most impact window installations in Fontana land between $8,000 and $25,000 depending on unit count, size, and whether the openings need structural correction. Window replacement of any type usually runs $4,500 to $15,000, and tile roof repair tied to flashing or penetration work adds $600 to $2,500. The big variable here is whether you’re in an older 92334 or 92335 home with racked openings or a newer 92336 or 92337 build with cleaner framing. Call (877) 265-6284 for a written, line-item estimate – we’ll show you every dollar before you sign anything.
Service Areas Near Fontana
Our PGT work covers all four Fontana ZIP codes – 92334, 92335, 92336, and 92337 – and extends into surrounding communities. We run Fontana service area calls into Bloomington, Rialto, Rancho Cucamonga, and Jurupa Valley, and we take PGT projects in PGT service in Garnet and PGT service in Santa Ana when the job calls for it.
Book Your PGT Service in Fontana Today
If your PGT windows or sliding doors are fighting you, call us at (877) 265-6284. We’ll schedule a walk-through, diagnose the unit and the opening, and give you a written estimate for whatever the job actually needs. Sycamore Contractors serves every Fontana ZIP code with one team, one contract, and clear line-item pricing on every project.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Fontana and the Inland Empire with independent PGT installation and service.