Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Cabinet Installation Cost in Temecula?
Cabinet installation in Temecula typically runs $4,000 to $13,000 for a full kitchen, including removal of old cabinets and new hardware. A straightforward layout with stock or semi-custom boxes lands closer to $4,000-$7,000, while custom cabinetry, islands, and tricky plumbing relocations push toward the top of that range. Most single-family kitchens in Temecula finish in that spread because the housing stock, from Redhawk to Wolf Creek, was built with standard box dimensions that keep labor predictable.
If you’re weighing the cabinet line itself, the material choice moves the number more than anything else. We install KraftMaid and Wellborn as our primary cabinet partners, and those two lines cover a wide spread from semi-custom to full custom. Call (877) 265-6284 for a free estimate on your specific kitchen.
Cabinet Installation Cost Breakdown (2026)
Here’s how the $4,000-$13,000 range breaks down by component. These are installed prices for the Temecula market, not just the box cost.
| Line Item | Typical Cost Range |
|---|---|
| Base cabinets (per linear foot, installed) | $250-$550 |
| Upper wall cabinets (per linear foot, installed) | $200-$450 |
| Full kitchen, stock/semi-custom | $4,000-$7,500 |
| Full kitchen, custom cabinetry | $8,000-$13,000 |
| Cabinet removal and disposal | $300-$800 |
| Cabinet hardware (handles, pulls, hinges) | $150-$600 |
| Island cabinet install (add-on) | $1,500-$4,500 |
| Plumbing/electrical rough-in adjustments | $400-$1,800 |
| Crown molding and filler trim | $250-$900 |
What pushes a job up? Custom doors and drawer fronts, soft-close hardware through the whole run, pantry or floor-to-ceiling units, and any time the new layout requires moving a sink, moving a range outlet, or furring out a wall that isn’t plumb. What pulls it down? Reusing your existing cabinet boxes and swapping only the doors and fronts, choosing a semi-custom line like Wellborn instead of full custom, and keeping the sink and range in their current spots. A kitchen with a simple L-shape and no island is the cheapest shape to install; a galley layout with a peninsula is the most expensive per linear foot because of the fitting work.
What Affects Cabinet Installation Pricing in Temecula
Temecula has its own set of cost drivers that don’t apply everywhere. Here’s what we watch for on local jobs:
- Home age and wall condition. A lot of Temecula’s older tract homes in neighborhoods like Paloma del Sol and Vintage Hills have drywall and framing that has settled over the years. When a wall is out of plumb by half an inch, cabinets need shimming and scribing to sit clean, which adds labor. Newer builds in Roripaugh Ranch and Morgan Hill usually install faster because the framing is truer.
- Cabinet line and door style. The jump from semi-custom to full custom is the single biggest swing. KraftMaid and Wellborn both let you stay in semi-custom territory without giving up the look, and that keeps the project in the $4,000-$9,000 zone instead of the top of the range.
- Layout changes. Keeping the sink, dishwasher, and range where they are saves the plumbing and electrical rough-in line entirely. Moving a sink even a few feet means opening the wall, re-running supply and drain lines, and patching drywall, which adds $400-$1,800.
- Ceiling height. Many Temecula homes have 9-foot ceilings, and going to the ceiling with taller uppers or a stacked-crown detail adds cabinetry and trim work. It looks great and adds storage, but it’s real cost.
- Permits. Cabinet replacement alone usually doesn’t trigger a City of Temecula building permit, but if you’re moving walls, adding an island with new electrical, or relocating plumbing, the project crosses into permitted work. We handle permit coordination as part of the scope rather than handing it off.
- Countertop and backsplash sequencing. If you’re replacing cabinets, the countertop and backsplash usually come out too. We plan cabinet, countertop, and backsplash as one sequence so you’re not paying a second crew to come back. Countertops run $2,000-$6,500 and backsplash adds $800-$2,500.
How to Save on Cabinet Installation
There’s real room to trim the number without sacrificing the kitchen. A few moves that consistently work in Temecula:
- Keep the plumbing and electrical where they are. This is the biggest single saver. Every fixture that stays put is money you don’t spend opening walls.
- Choose semi-custom over full custom. KraftMaid and Wellborn both cover the styles most homeowners want, and semi-custom keeps you out of the $10,000-plus zone. You can research the door styles and finishes before you commit.
- Reface instead of replace if the boxes are solid. If your existing cabinet boxes are square and the layout works, new doors and drawer fronts cost far less than a full swap. We’ll tell you honestly whether refacing is worth it on your particular cabinets.
- Bundle the countertop and backsplash into one scope. One crew, one mobilization, one schedule. We handle cabinets, stone counters, and tile backsplash in a single sequence, and that trims the overhead that comes from juggling separate trades.
- Ask about hardware and trim as a package. Handles, pulls, soft-close, and crown installed at the same time as the cabinets cost less than adding them later.
Free estimates are the fastest way to know which of these applies to your kitchen. Call (877) 265-6284 and we’ll walk through your layout, your cabinet line options, and what the real number looks like.
What’s Included in a Cabinet Installation Quote
A fair Temecula quote should spell out exactly what’s covered so nothing turns into a surprise line item. When we quote cabinet installation, it covers:
- Removal and haul-away of the old cabinets and hardware.
- Cabinet delivery, layout, and installation with shimming and scribing to the wall.
- Hardware installation (handles, pulls, hinges, soft-close mechanisms).
- Crown molding, filler trim, and toe-kick work.
- Coordination of countertop template and installation so the sequence doesn’t stall.
- Patching and touch-up where old cabinets left marks.
What a quote should also be honest about: if we open a wall and find old plumbing that needs replacing, or framing that’s out of square, that’s added scope. We flag it before we start rather than discovering it mid-job. That’s part of what one accountable team means – you’re not getting a call from three different subs with three different stories.
Cabinet Installation vs. a Full Kitchen Remodel
Homeowners often ask whether they should just do the whole kitchen. The honest answer depends on what’s behind the cabinets. Cabinet installation alone runs $4,000-$13,000. A full kitchen remodel in Temecula runs $14,000-$45,000, which includes cabinets, countertops, backsplash, new plumbing fixtures, lighting, and often flooring. A smaller kitchen remodel lands in the $9,000-$20,000 range.
If your layout works and the appliances are staying, cabinet installation plus new counters and backsplash usually gets you most of the visual lift for a fraction of a full remodel. If you’re reconfiguring walls, adding an island, or replacing the flooring at the same time, the full-scope approach usually makes more sense because it’s one schedule and one accountable team. An island adds $3,000-$10,000 on its own. We’ll tell you which path fits your kitchen rather than defaulting to the bigger job.
Why Brand-Name Cabinet Lines Matter
Cabinets are the one part of a kitchen that has to hold up to daily opening, closing, and slamming for decades. We install KraftMaid and Wellborn because both lines meet the manufacturer’s own construction standards, which means the boxes, hinges, and drawer glides are built to a specification you can look up. That’s the difference between a cabinet that holds its alignment after five years and one that doesn’t. We bring options across both lines so you can compare door styles, finishes, and construction side by side. You make the call; we don’t push a single take-it-or-leave-it product.
How Long Does Cabinet Installation Take?
A standard Temecula kitchen cabinet install takes 2-4 days for installation, with the full sequence (removal, install, countertop template, countertop install, backsplash) running 2-3 weeks from start to finish. Custom cabinetry takes longer to build before it arrives, often 4-8 weeks, so planning early matters. We schedule the countertop template right after cabinets go in so the gap between install and usable kitchen is as short as possible.
FAQs – Cabinet Installation Cost
How much does cabinet installation cost in Temecula?
Cabinet installation in Temecula costs $4,000 to $13,000 for a full kitchen. Semi-custom in a standard layout typically lands in the $4,000-$7,500 range, while full custom and island work pushes toward $13,000. Call (877) 265-6284 for an exact quote – estimates are free.
Is it cheaper to reface or replace cabinets in Temecula?
Refacing is usually cheaper than a full replacement, often 30-50% less, when the existing boxes are solid and the layout works. Replacing the whole cabinet is the better call when boxes are water-damaged, out of square, or the layout needs to change. We’ll tell you which applies after seeing your cabinets.
Do I need a permit for cabinet installation in Temecula?
Cabinet replacement alone typically doesn’t require a City of Temecula permit. Moving walls, relocating plumbing, or adding an island with new electrical usually does. We handle the permit coordination as part of the scope when it’s needed and flag it before work starts.
Can you install cabinets and countertops together?
Yes, and doing so usually saves money. Countertop installation runs $2,000-$6,500 and is sequenced right after cabinets so you’re not paying a second crew to come back. One schedule, one point of contact. Call (877) 265-6284 to plan both in one estimate.
How much does a kitchen island cost to install in Temecula?
A kitchen island install adds $3,000-$10,000 on top of the cabinet line, depending on size, whether it has sink or cooktop rough-in, and how custom the cabinetry is. Call (877) 265-6284 for an island-specific quote.
What’s the most affordable way to update kitchen cabinets in Temecula?
Keeping the existing boxes and updating doors, drawer fronts, and hardware is the most affordable route, often under $4,000. Next is semi-custom KraftMaid or Wellborn in the existing layout, which lands in the $4,000-$7,500 range. Free estimates make the comparison easy – call (877) 265-6284.
Related Services Around Temecula
Cabinet work often overlaps with other projects on the same home. If you’re planning a bathroom update at the same time, bathroom remodels in Temecula run $9,000-$28,000, and a vanity install alone is $800-$3,000. A walk-in shower runs $4,500-$12,000. If the exterior needs attention while you’re in project mode, roof replacement in Temecula runs $8,000-$20,000, and window replacement $4,500-$15,000. For a broader interior scope, a home addition runs $45,000-$130,000 and an ADU construction project runs $90,000-$220,000.
We also work across the region. For cabinet work in the neighboring Inland Empire market, see Cabinet Installation in Rialto. And for the full range of what we handle from the roof down to the driveway, visit our home page.
Get a Cabinet Installation Estimate in Temecula
Cabinet installation is one of the most cost-effective ways to change how a Temecula kitchen looks and functions. The range is $4,000-$13,000, and we’ll tell you exactly where your kitchen falls and why. We bring brand-name options from KraftMaid and Wellborn so you can compare door styles and finishes before you commit, and we handle the countertop and backsplash sequence in the same scope so you’re not chasing three different crews.
Call (877) 265-6284 for a free estimate. We’ll walk your kitchen, talk through the layout and cabinet line options, and give you a real number – no pressure, no placeholders.
Pricing reflects the Temecula market as of 2026. Sycamore Contractors offers free estimates – call (877) 265-6284. Written by the team at Sycamore Contractors, serving Temecula and the surrounding Inland Empire.
What Our Customers Say
"Quality construction and a professional operation. Communication was strongest at the site meetings, and slower by email in between."
— Justin Kim"Every inspection passed first time. The building department clearly knows him and that made the whole process easier."
— Luis Rodriguez"Framing crew was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
— Colleen Whitaker