Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Placentia, CA | Sycamore Contractors
We provide independent Mr-Glass sales & service across Placentia, and the thing that separates our work here from a generic glass crew is simple: we know these 1950s and 1960s tract homes. The walls aren’t plumb, the original shower pans weren’t built for today’s heavier glass, and the hard water leaves mineral deposits that eat rollers alive. Call (877) 265-6284 for a free estimate from a crew that’s measured, installed, and repaired Mr-Glass enclosures in Placentia’s specific housing stock for years.
What you’re getting with us is straightforward. We’re an independent contractor, not a manufacturer-authorized dealer. That means our honesty runs one direction: toward you. If a seal replacement makes sense and the glass is still good, we’ll tell you. If the glass itself is done, we won’t sell you a rebuild that fails in two years. Our work stands on measurement discipline, flashing, and waterproofing on older tract homes, not on a brand badge. Serving Placentia service area ZIP codes 92870 and 92871.
Why Placentia Residents Choose Us for Mr-Glass Service
Most Mr-Glass problems in this city aren’t the result of a bad product. They’re the result of what happens when a well-engineered enclosure meets a house built in 1962. Nate Calloway, our owner, grew up in Temecula’s Redhawk neighborhood and spent two decades swinging hammers across Southwest Riverside County before building Sycamore Contractors. When he looks at a leaking Mr-Glass slider in a Placentia tract bath, he’s not guessing, he’s reading what the house is telling him.
We carry genuine Mr-Glass rollers, hinges, seals, and sweeps for enclosures where the original hardware is still serviceable. When the OEM part is discontinued or you’re upgrading to frameless, we use quality aftermarket equivalents and tell you exactly why. That’s the independent advantage. We’re not pushing a manufacturer’s warranty claim, we’re solving your water problem.
- Familiar with Mr-Glass frameless pivot, semi-frameless slider, and neo-angle corner units
- Stock common rollers, sweeps, and hinge hardware for fast Placentia turnaround
- Free estimates with written line-item pricing, no change orders sprung mid-job
- Licensed, insured, and accountable under one contract with one point of contact
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Placentia
Not every issue needs a full replacement. Here’s what we see most in Placentia, and what we do about it.
- Roller and track wear on semi-frameless sliders. Placentia’s water is hard, full of minerals that leave a fine film on glass and hardware. That film grinds down nylon rollers and gums up tracks faster than anyone expects. We swap worn rollers, clean and re-align tracks, and set the door so it rolls clean again.
- Seal and sweep failure at the curb and jamb. The original showers in these 1950s to 1970s stucco baths were never framed for a heavy glass door. When the sweep wears, water wicks into framing and drywall that has no water protection. We pull the enclosure, rebuild the curb waterproofing, and set new seals before re-hanging the glass.
- Out-of-plumb and out-of-square openings. Older Placentia tract homes have settled. Original walls and curbs drift. A stock Mr-Glass panel racks, the door swings or binds. We re-square the opening before install. A half-inch out of plumb is not a shim job, it’s a wall correction.
- Thermal and impact cracking on west- and south-facing panels. Hot, dry summers with Santa Ana wind events stress glass that’s under-spec’d or already scratched. We match the correct tempered panel for the exposure and replace.
- Corrosion and pitting on hinges and handle hardware. Humid bath air plus hard-water splash eats builder-grade finish. We swap in new hardware rated for the moisture load, not whatever was cheapest in 1973.
Mr-Glass Service in Placentia: What Local Conditions Mean for Your Equipment
Here’s the thing about Placentia that doesn’t show up on a sales brochure: the city is essentially built out. There’s no greenfield. Nearly every Mr-Glass job here is a remodel inside an existing bath, or an addition or ADU tied onto a post-war slab-on-grade home. And in the older 92870 tracts, that slab often carries post-tension cables or has original plumbing embedded under the bath footprint. That’s not a problem for a competent crew, but it’s a disaster for one that doesn’t scan before cutting or coring. We scan before we cut for a new shower drain or door opening. That’s not a sales line. It’s the difference between a clean install and a saw blade through a tension cable. Nobody wants that phone call.
Nate puts it the way he always does: “Do it right the first time, or you’ll do it twice in the July heat.” On a 1960s single-story stucco home near the Placentia Civic Center area, we pulled a tired semi-frameless Mr-Glass slider whose rollers had flat-spotted and whose curb sweep had been leaking into the original pan for years. The bath wall was out of plumb by nearly half an inch. We re-squared the opening, rebuilt the curb waterproofing, and set a frameless Mr-Glass pivot with new hinges and seals. No more water tracking onto the hall flooring during Santa Ana-wind dust season when the bath door stays closed.
Mr-Glass Models & Products We Service in Placentia
We work across the Mr-Glass line you’re likely to find in Placentia homes:
- Frameless pivot shower enclosures
- Semi-frameless sliding shower doors
- Neo-Angle corner shower units
- Clear and obscure tempered glass panels, custom-cut runs
Our parts approach is what you’d expect from a contractor who’s seen the same failure modes hundreds of times. Genuine Mr-Glass rollers, hinges, seals, and sweeps when the original hardware is serviceable. Quality aftermarket equivalents when the OEM part is discontinued, or when you’re upgrading to frameless and the whole assembly changes anyway. We stock common components locally for fast turnaround across Placentia and Fullerton Mr-Glass service.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Placentia
What drives the cost on a Mr-Glass job in Placentia is the condition of the opening, not the brand name on the glass. Older tract baths with settled walls and failed waterproofing take more prep than a newer build. Here’s where most Mr-Glass work lands:
| Service | Typical Range |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Remodel | $9,000 – $28,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Your free estimate includes a written line-item quote. We measure, we check the opening for plumb and square, we scan the slab where cutting is involved, and we price it before you commit. Call (877) 265-6284 to schedule.
Serving Placentia, CA — Our Local Coverage Area
We’re based in the Placentia area and offer Anaheim Mr-Glass service as well, so we know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Placentia
No. We’re an independent contractor with years of hands-on experience installing and repairing Mr-Glass enclosures across north Orange County, including Mr-Glass repair in Brea, Placentia. Independence means we recommend the fix that’s right for your house and your budget, without any manufacturer warranty mandate or parts-push incentive. We’ll tell you honestly when a re-seal and hardware swap will outlast the enclosure.
In Placentia, west- and south-facing glass takes direct late-afternoon heat, then sudden Santa Ana wind-driven pressure and temperature swings. If the panel was under-spec’d, scratched during a previous install, or set too tightly in its frame, that stress concentrates at the edge and the panel cracks. We match the correct tempered panel for the exposure and set it with proper clearance so it can move. Call (877) 265-6284 and we’ll tell you what you’re really looking at.
Most roller, sweep, and hardware replacements on a single Mr-Glass slider run a half day to a full day in Placentia. If the opening is out of plumb and we’re re-squaring the wall plus rebuilding curb waterproofing, figure one to two days. We’ll give you a straight answer at the estimate, not an optimistic guess you’ll regret later.
We service Mr-Glass frameless pivot enclosures, semi-frameless sliders, neo-angle corner units, and custom-cut clear or obscure tempered panels. If it’s a Mr-Glass shower or tub enclosure and the glass is sound, we can almost always rebuild the hardware and waterproofing. If the glass is cracked or the temper failed, we’ll say replacement is the smarter spend.
Expect $3,500 to $10,000 for a Mr-Glass tub-to-shower conversion in Placentia, depending on whether the original drain and slab penetration are in good shape and whether the walls need re-squaring. Older 92870 tract homes often need more prep than newer builds. Call (877) 265-6284 for a free estimate with line-item pricing.
Service Areas Near Placentia
Beyond Placentia, we regularly run Mr-Glass service to Temecula, Murrieta, Murrieta Hot Springs, Wildomar, Fallbrook, and Rainbow. If you’re near those areas, compare notes on our Mr-Glass service in Thousand Palms page or the Mr-Glass service in Desert Hot Springs page for how we handle that climate’s glass and hardware challenges.
Book Your Mr-Glass Service in Placentia Today
If your Mr-Glass shower door is sticking, leaking, or rattling against a settled tract-house wall, we’ll look at it and tell you the truth. Free estimates, written pricing, and same-week scheduling for most Placentia repairs. Call (877) 265-6284.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Placentia since he picked up his first hammer.