M

Mr-Glass Construction in Running Springs, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Mr-Glass Construction in Running Springs, CA | Sycamore Contractors

We provide independent Mr-Glass sales and service across Running Springs, CA, and Mr-Glass service in Highland as well, and the one thing that separates our work from any flatland contractor is that we plan every Mr-Glass window, door, and shower enclosure install and repair around the San Bernardino County mountain-specific review that layers WUI fire-resistance on top of snow-load and seismic design. That combined checklist changes which glazing, flashing, and hardware actually hold up at 6,000 feet, and it’s the reason we stock different parts and stage jobs differently than a crew running routes down in San Bernardino or Redlands. Sycamore Contractors is an independent Mr-Glass service provider, not a manufacturer-authorized dealer, so when we recommend a repair or a full replacement, the recommendation comes from what we see fail on Running Springs homes, not from a factory script. Call (877) 265-6284 for a free estimate on any Mr-Glass window, door, or shower enclosure in the 92382 ZIP.

Call (877) 265-6284

Why Running Springs Residents Choose Us for Mr-Glass Service

We know the Mr-Glass product lines on this mountain the way a mechanic knows a specific engine family. The Mr-Glass sales & service work we do here covers the Series 800 sliding glass door, the vinyl single-hung and slider window line, aluminum patio and entry door systems, and frameless and semi-frameless shower enclosures. More importantly, we know where these assemblies fail when snow sits on a roof for six weeks and freeze-thaw cycles work the seals every night. Nate Calloway, our owner, grew up in the Redhawk neighborhood of Temecula and spent nearly two decades running crews before starting Sycamore, and he’s brought that same fixation on what actually holds up to the mountain lots above 5,000 feet. When a homeowner in Running Springs asks whether to repair a fogged Mr-Glass slider or replace the whole unit, they get a straight answer based on the frame condition, the rough opening, and the county’s fire-resistance requirements, not a guess. We carry OEM Mr-Glass glass units, rollers, and hardware where the part still exists and matches the frame, and a quality aftermarket match when it doesn’t.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Common Mr-Glass Construction Problems We Solve in Running Springs

Here’s what we actually find when we open up Mr-Glass assemblies on Running Springs homes:

  • Fogged insulated glass from ice damming. Snow loads push meltwater behind the window head and sill flashing, and over time that water rots the rough opening and fogs the insulated glass unit from the bottom edge up. We see this constantly on older mountain cabins where the original flashing wasn’t detailed for the snow-load reality up here.
  • Stiff sliders and brittle weatherstripping. Freeze-thaw cycling on mountain cabins cracks and shrinks glazing seals and setting blocks. Every spring, we find failed perimeter seals and water stains on the interior jamb, and the panel gets hard to move because the track has grit in it and the weatherstripping has gone brittle.
  • Degraded vinyl frames on south- and west-facing windows. UV and grit from wind-driven snow pit and degrade vinyl frames and slider tracks. The panels go stiff, the weatherstripping flakes, and the thermal performance drops. It’s not a manufacturing defect; it’s what 6,000 feet of exposure does to an assembly that was never specced for it.
  • Ember-damaged gaskets and frame components. In WUI zones, ember and radiant-heat exposure cooks gaskets and frame parts that were installed without fire-hardened flashing details. We replace those with assemblies sized for the county’s combined WUI and snow-load review, which is a different conversation than a valley contractor ever has.
  • Rusted-through sill flashing on Mr-Glass sliders. On sloped lots with pier-and-beam foundations, drainage runs hard and ice dams form fast. We regularly find Mr-Glass slider sill flashing rusted through from years of ice damming, and the fix is never just the glass; it’s the rough-opening framing and flashing behind it.

Mr-Glass Service in Running Springs: What Local Conditions Mean for Your Equipment

Running Springs builders work under San Bernardino County mountain-specific plan review, and that’s the part no generic Mr-Glass page ever mentions. WUI fire-resistance details sit on top of snow-load and seismic calculations, so any exterior glass we install in Running Springs has to be documented against that combined checklist before it goes in. A warm winter day can turn a snow-loaded roof into an ice-dam problem by evening, and the county’s fire rules often dictate material choices before the first plan check. On a 1970s A-frame off a steep, narrow mountain road near Running Springs, our crew found the original Mr-Glass slider fogged from the bottom and the sill flashing rusted through from years of ice damming. Because the road limited how much equipment and glass we could bring up, we staged the new unit and replaced the rough-opening framing and flashing in one trip, then installed an ember-resistant glazing assembly sized for the county’s combined WUI and snow-load review. That’s the reality of Mr-Glass work in Running Springs. Down in the flat valleys, you swap a window. Up here, you engineer it.

Mr-Glass Models & Products We Service in Running Springs

Our Mr-Glass service coverage in Running Springs includes the full residential product range: the Series 800 sliding glass door, vinyl single-hung and slider windows, aluminum patio and entry door systems, and frameless and semi-frameless shower enclosures. We also offer Mentone Mr-Glass service with the same mountain-specific expertise. When a part still exists and matches the frame, we use OEM Mr-Glass glass units, rollers, and hardware. When it doesn’t, we use a quality aftermarket match and tell you exactly what changed and why. On original mountain-cabin windows and enclosures that are 30-plus years old, we are honest about the math: a full unit replacement is usually cheaper than chasing one failed sash and the frame rot behind it. We stock common Mr-Glass rollers, locks, weatherstripping, and glass units for fast Running Springs turnaround, so you are not waiting on a truck from down the hill.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Mr-Glass Service Pricing in Running Springs

Mr-Glass construction pricing in Running Springs depends on what failed, the age of the unit, and whether the rough opening needs reframing. Here are the ranges we quote most often for this area:

Service Running Springs Price Range
Window Replacement $4,500 – $15,000
Impact Window Installation $8,000 – $25,000
Walk-In Shower Installation $4,500 – $12,000
Roof Repair $400 – $1,800
Roof Replacement $8,000 – $20,000

Snow-load and WUI detailing, steep-slope staging, and narrow-road equipment limits all add cost on Running Springs jobs, and we explain those line items before work starts. Your free estimate includes the full scope, written, with no change orders. Call (877) 265-6284 to schedule yours.

Serving Running Springs, CA — Our Local Coverage Area

We’re based in the Running Springs area and know this community well, and we also provide Mr-Glass service in Lake Arrowhead, Highland, Mentone, and Crestline. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs – Mr-Glass Construction in Running Springs

Service Areas Near Running Springs

We serve Running Springs service area and the surrounding mountain and valley communities, including Temecula, Murrieta, Murrieta Hot Springs, Rainbow, Fallbrook, and Wildomar. If you’re up here in the mountains or down in the valley, we cover both. For Mr-Glass work in the Inland Empire, see Mr-Glass service in Rancho Cucamonga and Mr-Glass service in Garden Grove.

Book Your Mr-Glass Service in Running Springs Today

If a Mr-Glass window, door, or shower enclosure is failing on your Running Springs home, or you need Mr-Glass repair in Crestline, call (877) 265-6284 and we’ll get it scoped. We stage mountain jobs around the roads, the snow, and the county’s WUI review, and we’ll give you a straight answer on repair versus replacement before you spend a dollar. Free estimates, written line items, and no change orders.

Written by Nate Calloway, Owner at Sycamore Contractors, serving Running Springs and the San Bernardino Mountains.

Need Construction help in Running Springs? Licensed & insured · Free on-site estimates response · free estimates
Call (877) 265-6284
Areas We Serve

Request a Free Estimate in Running Springs

Tell us what you need — Sycamore Contractors responds fast. No obligation.

By providing your information above, you agree to our Privacy Policy and agree to be contacted by phone, email, or text about your request, including by the independent professionals who may fulfill it.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch