Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Santa Ana, CA | Sycamore Contractors
We provide independent Mr-Glass service in Tustin and across Santa Ana – shower enclosures, framed glass, mirrors, and custom-cut panels – without any manufacturer authorization, which means we answer to you, not a brand rep. What makes our Mr-Glass work different here is that we plan every job around the realities of Santa Ana’s older housing stock: undersized fir framing, tight downtown lots, and hot-wind-then-wet-winter weathering that beats up glass hardware faster than homeowners expect. Call (877) 265-6284 for a free estimate, and we’ll give you a straight read on whether your unit needs re-hardwaring or full replacement.
Why Santa Ana Residents Choose Us for Mr-Glass Service
We’ve spent years working on Mr-Glass products specifically – framed and semi-frameless shower assemblies, fixed panels, and custom vanity glass – so we know how these units fail and how to source the right replacement parts. When a Mr-Glass bypass door starts jumping its track in a 1920s bungalow near downtown, we don’t guess. We’ve seen it enough times to know it’s usually flat-spotted rollers and a scale-packed bottom track, and we fix it accordingly.
Nate Calloway, our owner, grew up around old California framing and learned early that a shower door is only as good as the wall it hangs from. He runs our Santa Ana service the same way: inspect the opening before touching the glass, then quote honestly. We’re local to the area, we carry OEM-compatible Mr-Glass hardware and quality aftermarket rollers and seals for discontinued parts, and we schedule around your availability, not ours. Because we’re independent, we’re also free to tell you when a repair isn’t worth it.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Santa Ana
- Bypass rollers flat-spot and seize on semi-frameless sliders. In Santa Ana homes where the original Mr-Glass unit dates back a couple decades, the nylon wheels wear down to flat spots, and the door stops gliding – it thuds against the frame or derails entirely. We re-hardware the assembly with fresh rollers and reset the door so it tracks smoothly.
- Bottom track and seal channels pack with mineral scale and soap film. Santa Ana’s hard municipal water leaves calcium deposits fast, and once the channels clog, water sits against the curb. That’s how mold starts and how frame fasteners rust out from the inside. We strip the track, replace the seals, and treat the metal so it drains properly.
- Anodized aluminum frames pit and chalk under Santa Ana’s wind cycles. Hot, dry Santa Ana winds alternating with winter rain are brutal on west-facing and exterior-adjacent units. The finish dulls, pits, and eventually the frame loses its seal. We can often re-finish salvageable frames or replace the worst sections with matched profiles.
- Pivot hinges and header brackets loosen as older framing shifts. In Santa Ana’s pre-1950 homes, corner framing moves with seasonal moisture and temperature swings. When a Mr-Glass pivot door drifts out of plumb, the tempered edges take stress they were never designed for – and that’s where chips start. We shim and brace the opening before re-hanging the door.
- Glass panels crack from improper original installation on out-of-square openings. We see this in postwar tract homes and in older bungalows where a previous installer forced a square assembly into a wall that wasn’t square. We re-cut or re-order glass to fit the actual opening, not the theoretical one.
Mr-Glass Service in Santa Ana: What Local Conditions Mean for Your Equipment
Santa Ana’s older core – especially the downtown 92701 area and the Craftsman and Spanish Revival streets around it – is full of original redwood and fir floor framing that is still sound but undersized by modern standards. That matters for Mr-Glass work in a way it wouldn’t in, say, Mr-Glass repair in North Tustin or a newer Irvine tract. When a homeowner wants an upstairs bath with a heavy tile shower and a frameless Mr-Glass enclosure, the existing joists often can’t carry the added dead load without reinforcement. We’ve had jobs where the glass and tile were never the problem – the floor was moving enough under foot traffic to stress the enclosure’s header brackets. So before we hang glass in an older Santa Ana home, we check what’s underneath it. That site assessment is part of every free estimate we do in 92701, 92706, and the surrounding ZIPs.
Mr-Glass Models & Products We Service in Santa Ana
We service the full range of Mr-Glass products found in Santa Ana homes, including semi-frameless sliding shower door units, framed shower enclosures with bypass rollers, framed and frameless fixed glass panels and mirrors, and custom-cut glass for vanities and shelves. For parts, we use OEM Mr-Glass glass and hardware when a matched assembly is still available, and quality aftermarket rollers, seals, and hinges when the exact OEM part has been discontinued. We also keep common roller sizes, seals, and header bracket hardware stocked locally so most Santa Ana calls don’t wait on a special order. If the frame is sound and only the hardware is tired, we re-hardware honestly. If the glass is chipped, out-of-square, or the track is failing, we tell you and quote a replacement rather than patching it. See our full Mr-Glass sales & service page for the complete scope.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Santa Ana
Here’s what you can expect to pay for the Mr-Glass work we handle most often in Santa Ana. These are installed ranges, including labor, basic framing prep, and standard hardware. Exact pricing depends on your opening size, glass type, and whether we’re working around existing tile or doing a full conversion.
| Service | Typical Range in Santa Ana |
|---|---|
| Walk-In Shower Installation | $4,500 – $12,000 |
| Frameless Glass Shower Enclosure | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Shower Replacement | $3,000 – $8,500 |
| Bathroom Vanity Installation | $800 – $3,000 |
Your free estimate includes a framing check, a track and roller inspection if it’s a repair, and a written line-item quote. No change orders invented mid-job. Call (877) 265-6284 to get your exact number.
Serving Santa Ana, CA — Our Local Coverage Area
We’re based in the Santa Ana area and know this community well, and we also handle Mr-Glass in Fountain Valley. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Santa Ana
No. We’re an independent contractor with deep hands-on experience on Mr-Glass products, but we have no authorization, partnership, or warranty relationship with the brand. That’s actually an advantage for you – we recommend the fix that makes sense, whether it’s an OEM part, a quality aftermarket replacement, or a full unit swap. No one pushes us toward a particular solution.
Both, depending on what’s available and what’s best for your unit. We use OEM Mr-Glass glass and hardware when a matched assembly is still in production, and we substitute quality aftermarket rollers, seals, and hinges when the exact OEM part has been discontinued. We’ll show you what we’re installing and explain the difference before we do the work. Call (877) 265-6284 and we’ll assess your specific unit.
Most roller and seal repairs are done in a single visit, usually two to three hours including cleanup. A full tub-to-shower conversion or walk-in shower install typically takes two to four working days depending on framing work and tile scope. In older Santa Ana homes with undersized framing, we may need an extra day for engineering reinforcement before glass goes in. We’ll give you a clear timeline at the estimate.
For a straight glass replacement or re-hardware job, a Santa Ana permit is generally not required. When the work changes the shower footprint, moves a drain, relocates a wall, or alters framing – which happens often in Santa Ana’s older homes – we pull the permit and schedule the inspection as part of the job. You won’t be asked to chase anything down at the counter.
In Santa Ana, a tub-to-shower conversion runs $3,500 to $10,000 installed, depending on the glass configuration, tile work, and whether the existing drain location works or needs moving. Older homes with cast-iron tubs and original fir subfloors tend to run toward the higher end because demo and floor patching take longer. Call (877) 265-6284 for a free, exact quote on your bathroom.
Service Areas Near Santa Ana
We serve Santa Ana and the surrounding Orange County communities. If you’re in a neighboring area, our Santa Ana service area page has more detail on coverage. We also run Mr-Glass service crews for clients in Orange and Costa Mesa, so if you’re near the city line, we can typically get you scheduled from one of those routes.
Book Your Mr-Glass Service in Santa Ana Today
If your Mr-Glass shower door is sticking, jumping track, or showing frame corrosion, call us before it gets worse. We’ll inspect it, give you a straight answer, and if it’s a repair we can often get it handled on the first visit. Phone: (877) 265-6284. Free estimates across Santa Ana, including 92701, 92706, 92707, and 92711.
Written by Nate Calloway, Owner at Sycamore Contractors, serving Santa Ana as your General Contractor – Santa Ana and surrounding communities.